Welcome Guest to Charlie's FlyBox!
Hi-viz Rusty Spinner
step: 1
Pattern Description
This pattern is a variation on the standard rusty spinner that has a good bit of added floatation and visibility. The addition of the palmered thorax hackle makes the fly much more visible and helps keep it afloat. I have used this pattern everywhere from the Henry's Fork to the Frying Pan and it turns heads everywhere. I also use this fly as an "attractor" on rivers like the South Platte and Big Thompson during midday non-hatch periods during the summer months. Spinners don't always fall all at the same time and the fish seem to be on the look out for the random spinner. If you haven't had much luck with traditional spinners, try this pattern. It is much easier to see in the fading evening light so common to spinner falls.
Materials Needed: All materials used here available for mail order. Please use the contact form for pricing and details.

Hook: TMC 100 #14-24 Thread: Rusty Brown 70 Denier or 8/0 Tail: Four rusty brown Microfibbetts Wings: White or Light Dun Float Viz Abdomen: Stripped and dyed hackle quill, rusty brown Hackle: Badger rooster neck, oversized by one hook size Thorax: Rusty Brown Superfine Dubbing
step: 2  
Attach the thread and leave a long tag end. Wrap back over the tag to the bend, keeping it on top of the hook shank.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 3  
Tie in four Microfibbetts at the bend. The tails should be about one and a half shank lengths long.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 4  
Pull the tag end of the thread up between the tailing fibers dividing them two to a side.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 5  
Tie down the tag end of the thread and clip the excess.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 6  
Move the thread up to the eye and back to the eighty percent point forming a thread base for the wing that follows.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 7  
Tie in a clump of white or dun Float Viz and secure with X wraps to form spinner wings.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 8  
Pull the wings forward and twist them in your fingertips so they stick together. This will keep them out of the way during the next few steps.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 9  
Tie in a stripped and dyed hackle quill (soak the quills in warm water for about ten minutes before using, it makes them softer and more pliable) by its tip at the rear edge of the wings and wrap back over it to the bend.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 10  
Wrap the quill forward in concentric turns up to the back of the wings and tie off. Add a drop of head cement to the quill body at this point.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 11  
Tie in a badger hackle feather that is oversized one hook size at the front of the quill body.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 12  
Apply a thin strand of rusty brown dubbing to the thread and start to build the thorax behind the wings.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 13  
Figure eight the dubbing through the wings.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 14  
Continue the figure eight to cover the wing tie down area.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 15  
Continue dubbing forward to the rear edge of the index point.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 16  
Start wrapping the hackle with three turns behind the wings.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 17  
Cross to the front of the wings and continue wrapping the hackle with three more turns up to the index point. Tie off the hackle and clip the excess tip.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 18  
Whip finish.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 19  
Pull the wings back to the rear edge of the hook and trim them to length.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 20  
Clip the hackle on the bottom of the hook so it is completely flush with the bottom of the thorax leaving only a 180 degree arc of hackle across the top of the fly.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 21  
Front View Clip the hackle on the bottom of the hook so it is completely flush with the bottom of the thorax leaving only a 180 degree arc of hackle across the top of the fly.
Hi-viz Rusty Spinner Hi-viz Rusty Spinner
click to enlarge
step: 22  
Done!
Hi-viz Rusty Spinner
click to enlarge