Welcome Guest to Charlie's FlyBox!
Barr's Viz-a-dun
step: 1
Pattern Description
Here's the fly you've all been waiting for! The Viz-A-Dun from John Barr. This pattern is a simple to tie, buoyant hatch matcher that is also easy to see. The Vizadun also incorporates a few little tying tricks that make the pattern quite durable. While not a far reach from the traditional thorax style patterns, the Vizadun is a new twist on an old fly. John likes this pattern as a front fly in a twoo fly combo rig, often dropping a Barr Emerger off the bend anywhere from six to eighteen inches back. The Vizadun is an unobtrusive indicator that allows feeding the fish the dropper without raising any eyebrows...do fish even have eyebrows?
Materials Needed: All materials used here available for mail order. Please use the contact form for pricing and details.

Hook: TMC 100 #16-24 Thread: 8/0 Light Cahill Tail: Blue Dun Hackle Fibers Wing: Light Dun Poly Yarn Hackle: Blue Dun Abdomen: Pale Yellow Superfine Dubbing Thorax: Pale Yellow Superfine Dubbing Glue: Vinyl Cement
step: 2  
Attach the tying thread at the seventy-five percent point and wrap a thread base back to the bend. Once at the bend, build a few wraps of thread into a small ball at the point directly above the point on the barb of the hook. This ball will help to splay the tails in the next steps.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 3  
Select six or eight spade hackle fibers and peel them from the quill, being careful to keep the tips even. Place the hackle fibers on the hook so the tips extend beyond the bend of the hook about one shank length. Bind the hackle fibers to the top of the shank with a couple turns of thread just in front of the thread ball.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 4  
Wrap the tying thread back over the tailing fibers right up to the base of the thread ball. As you wrap, the fibers will spay out across the ball forming a fan shaped tail.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 5  
Detail of fanned tail.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 6  
Wrap forward over the butt ends of the tail fibers to the midpoint on the hook and clip the excess there.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 7  
Continue forming a thread base from the mid point on the shank up to the hook eye and back again to the sixty-percent point.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 8  
Clip and brush out a clump of poly yarn. About half the strand that comes off the card is about right for a size 16. Tie this clump in on top of the hook at the sixty percent point.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 9  
Clip the butt ends of the poly yarn at an angle as shown. This angle will help to form the body taper later.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 10  
Bring the thread to the front of the wing and build a small thread dam to prop the wing upright. Do NOT post the wing; just build the thread dam to stand it up.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 11  
Select a hackle feather that has fibers equal to about one and a half hook gaps. Prepare the feather by stripping the butt end so the quill is exposed for a length of about two thirds of a shank length. Tie the hackle feather in with the outside of the feather up, in front of the wing and wrap back over the stem with the thread to the base of the wing.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 12  
Pull the hackle feather straight up so it is parallel to the wing. It tangles with the wing a bit and should stay out of the way in the meantime.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 13  
Apply a thin strand of dubbing to the thread and begin wrapping it with the first turn of dubbing at the bend of the hook. Work the dubbing forward to the forty percent point on the hook. You should still have a length of dubbing on the thread during this process. Stay with me, it will all make sense in a minute.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 14  
Pull the hackle feather back along the hook shank and bind it down with the dubbed thread as you continue forward with the dubbing.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 15  
Continue forward with the dubbing (over the bare hackle stem) up to, and in front of, the wing. Stop the dubbing at the seventy-five to eighty percent point, leaving a bit of bare shank in front of it.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 16  
Place a drop of thin Vinyl Cement at the base of the wing.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 17  
Allow the cement to bleed down into the dubbing at the base of the wing as shown. Spread the wing into a fan shape while the cement is still wet.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 18  
Quickly now, before the cement dries, palmer the hackle forward with two or three turns behind the wing and two or three in front, right over the wet cement. Tie off and clip the hackle feather on the bare shank in front of the dubbing.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 19  
Make a few turns of thread to cover the stub end of the hackle feather at the front. Note the space between the front of the hackle and the hook eye.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 20  
Apply another thin strand of dubbing to the thread and wrap it from the rear edge of the hook eye to the base of the wing and back again, forming the tapered thorax as shown.
Barr's Viz-a-dun Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 21  
Whip finish and clip the thread.
Barr's Viz-a-dun Barr's Viz-a-dun
click to enlarge
step: 22  
Trim a notch out of the bottom of the hackle forming a V shape cut out. Test the fly on a hard surface to make sure it sits upright.
Barr's Viz-a-dun
click to enlarge