charlie's flybox

Deer Hair Popper


Fly Patterns brought to you by Charlie's FlyBox
© All images, slogans and content are strictly copyrighted and may not be used or copied
without permission.
Charlie Craven and Charlie's FlyBox, Inc.
print this page

step: 1
Pattern Description
Tying hair bodied bass bugs is an area of mystery to most fly tyers. We are all enamored with a tightly packed, beautifully trimmed hair bug but unlike most trout flies, it often takes more than a casual glance to figure out the details of the tying process. Hair bugs are great fun and very satisfying to tie and tend to be addictive once you figure out the process. What I intend to convey here is the core techniques to create multi colored hair bugs as well as tips on trimming and shaping. Let me discuss some of the parts used here on this generic bass popper. We’ll start with the weed guard. I use Mason Hard Mono in 20 pound test for all my weed guards. This stiff mono is just the right diameter to fend of sticks and weeds yet collapses when the hook is set letting the angler drive the hook home. I attach the weed guards using 140 denier UTC thread to keep a smooth, durable layer of thread in place. Tails on flies like this can range from Super Floss, to feathers, to rabbit strips to Flashabou and any combination of the above. Over the years I have come to prefer mixed color strands of Super Floss as it is tough and doesn’t break off or dry rot with use. Feather tails, while very pretty, tend to be less durable and a fly with a missing tail is, well...no longer a fly. While some tyers use dyed cow elk hair for their bugs, I prefer deer hair, whether in dyed over natural colors that give a more muted appearance or dyed over white deer belly hair, which is quite vibrant and brightly colored. I look for patches of hair that are long, straight and thick, as hair like this will flare much better and make for a tighter bug. The tip shape of the hair does come into play on bugs like this because I often use the tips of the hair to form the collar at the back of the bug, so I also search out hair with unbroken, straight tips. As far as hooks go, I tie my hair bugs on stainless saltwater hooks for durability. The life of a well tied hair bug is quite long, and I have found that freshwater hooks will start to rust long before the fly is worn out. I fish all my hair bugs on heavy tippet and have yet to lose one in a fish, so the risk of leaving a fly stuck in a broken off fish is quite small. Trimming hair bugs requires a couple of commonly available yet more specialized tools. Use double edged razor blades, carefully broken or snipped in half, to trim all hair flies. These blades are much sharper than the single edge paint scraping blades found in hardware stores and as a bonus, can be bent and flexed to aid in the shaping of the bug. A standard tea kettle, like the one sitting on your stove right now is another requirement for tying hair bugs. After a preliminary rough shaping with the razor blade, hold the bug in a pair of forceps over the boiling kettle, allowing the steam to permeate the bug and open up the hair. The process of flaring and handling the hair flattens it, and the steaming process will bring each hair back to its original thickness, packing it tighter on the hook while at the same time stiffening the hair. Steamed hair will stand up better to the razor blade allowing perfect shaping and a bug that won’t change shape when fished.
Materials Needed:

Hook: TMC 811S #1/0>>> Thread: 140 Denier UTC, White for weed guard and tail, Kevlar or GSP 200 for Hair portion and red 8/0 UNI for head.>>> Weed Guard: 20-25 pound test hard mono>>> Tail: Superfloss, mixed colors>>> Body: Stacked, trimmed and steamed Deer Hair, colors of your choice.
step: 2
Start the 140 denier thread at the bend of the hook and make a smooth thread base just short of halfway down the curve of the hook. Return the thread to the starting point and tie in a length of hard mono. Wrap back over the mono to halfway down the bend, securing it along the top of the shank and return the thread to the starting point once again. charlie's flybox
charlies flybox
step: 3
Select three or four strands of four different colors of Super Floss and tie them in at the center of their length with a tight band of stacked thread wraps. charlie's flybox
charlies flybox
step: 4
Pull the front ends of the Super Floss back along with the back ends and draw them all tight. Make another tight band of thread over the fold at the bend of the hook to sweep all the strands rearward. charlie's flybox
charlies flybox
step: 5
Whip finish and clip the thread. I like to spiral wrap a scrap piece of lead wire around the tail strands for the time being to keep them out of the way while I tie the rest of the fly. charlie's flybox
charlies flybox
step: 6
Invert the hook in the vise and start the Kevlar or GSP thread behind the hook eye. Make a smooth thread base back to the bend, forward again to the hook eye and back once more to the base of the tail. charlie's flybox
charlies flybox
step: 7
Cut, clean and stack a large clump of deer hair in the color of your choice for the belly of your bug. Measure the tips of the hair so they extend just past the hook bend. Place three wraps of thread over the bunch of hair right at the bend of the hook. These wraps are taut but not yet tightened and should be right on top of one another. charlie's flybox
charlies flybox
step: 8
While holding tight to the butt ends of the hair with your thread hand, tighten the thread by pulling straight down on the bobbin, flaring the hair in place on the underside of the shank. Your thread hand will prevent the hair from spinning around the hook and only allow it to flare, keeping it positioned along the bottom of the hook shank. Leave the thread hanging right in the middle of the bunch. charlie's flybox
charlies flybox
step: 9
Turn the hook over so the point is on the bottom and cut, clean and stack another, smaller clump of hair of the same color as the first. Measure the tips of this clump so they reach those of the first bunch. charlie's flybox
charlies flybox
step: 10
Make two turns of thread over the second bunch of hair directly on top of the first bunch. The thread should be working through the center of both the bottom and top bunches of hair. Hold the butt ends of the hair in place as you again tighten the thread by drawing it firmly downward, flaring the new bunch of hair on top of the first bunch. charlie's flybox
charlies flybox
step: 11
Cut, clean and stack a third bunch of hair in a different (typically darker) color than the first. Measure the tips so they are even with the first two bunches and place two turns of thread over it, running straight through the center of all three clumps. Draw the thread down to flare it in place on the top of the second bunch. Make sure all the wraps are cinched down as tightly as possible. charlie's flybox
charlies flybox
step: 12
Draw all the hair back toward the bend and bring the thread up and around the shank as close to the front of the hair clumps as possible. charlie's flybox
charlies flybox
step: 13
Repeat the previous procedure one more time, first flaring a clump on the bottom of the hook, then flaring another directly on top of it, and finally flaring the third, darker clump of hair on top of the shank. This second batch of hair clumps do not need their tips for the collar as the first clumps did so I like to trim them out to make the hair easier to work with. This also eliminates the need to stack any of the remaining bunches. charlie's flybox
charlies flybox
step: 14
To add a fourth color spot or band of color, cut and clean a smaller bunch of hair and lay it under and against the working thread with the tips toward the hook eye. charlie's flybox
charlies flybox
step: 15
Fold the tips back so the hair is folded around the thread and you have both the tips and the butts pinched tightly in the fingertips of your material hand. Try to keep your thumb on the bottom of the bunch and your index and middle finger on the top. In this photo my thumb should be rotated down and away a bit more to reflect this, but hey, there’s an awful lot going on here... charlie's flybox
charlies flybox
step: 16
Bring the thread up through the center of the hair bunches, dragging the pinched clump of hair to the top of the hook as you bring the thread over the top of the hook and down again on the far side. Do not let the thread draw the clump of hair down into the main bunch, but instead hold the clump above the shank for the moment. charlie's flybox
charlies flybox
step: 17
Pull down on the thread and lower the bunch of hair into place in the center of the third bunch of hair (in this case, the rusty brown colored hair is placed into the center of the tan bunch of hair). Bring one more wrap of thread through the center of all four bunches and tighten it down firmly. charlie's flybox
charlies flybox
step: 18
Top view of our four stacked bunches of hair. charlie's flybox
charlies flybox
step: 19
Sneak your fingertips in at the front and the back of the fly as close to the shank as you can and firmly pack the bunches of hair toward the bend of the hook. charlie's flybox
charlies flybox
step: 20
That was so much fun we’re going to do it all one more time. Repeat steps blank through blank once more to create another band of color and stripes. charlie's flybox
charlies flybox
step: 21
By now there should be very little hook left at the front of the fly. Bring the thread directly to the front of the last bunch of hair and get ready, because we are going to pack three more bunches of hair on this little bit of hook, only this time we are going to use all three bunches in the same light belly color to form the face of the bug. The procedure will be the exact same as it has been, flaring one bunch on the underside of the shank, another on the top of that one and a third, folded in as per the spot section on the top of that. This will create a densely packed face for our bug that can be shaped much more easily and will hold that shape when we fish it. charlie's flybox
charlies flybox
step: 22
know you didn’t think we could pack three more bunches in there, but we did it. Bring the thread tightly behind the hook eye and whip finish it. Clip the heavy thread. charlie's flybox
charlies flybox
step: 23
Take the fly out of the vise. Break or clip a double edged razor blade in half lengthwise and bend it slightly as you push it through the hair from the front of the hook to just short of the hair tip collar at the bend. These first cuts will be rough shaping and thus should be trimming the bug to slightly larger than the desired finished shape and size. charlie's flybox
charlies flybox
step: 24
Drag the blade upward from the hook eye through the hair to flatten the face of the bug. charlie's flybox
charlies flybox
step: 25
Bend the blade again to trim the top, pushing from the front to the back of the fly in an arc. I show this step with the fly in the vise, but usually hold it in my hands for better control. charlie's flybox
charlies flybox
step: 26
Rough shape bug. Note that I have purposely left some of the butt ends in front of the collar to ensure that I don’t accidentally trim the collar in the process. We can clean these butts up later with the blade and scissors as needed. charlie's flybox
charlies flybox
step: 27
Take the fly from the vise and holding it in a pair of forceps by the hook bend, hold it over a steady stream of steam from a tea pot. The steam will enlarge the individual hairs and round them out again (they become flattened during handling and packing) as well as stand them up a bit. The steam also stiffens the hair making it stand up to the blade better and ensuring cleaner cuts. As the hair “grows” in diameter, it also becomes more tightly packed onto the shank. charlie's flybox
charlies flybox
step: 28
Go back in with a fresh blade and finish up the trimming. There should be about a third of the bug diameter on the bottom of the shank and the other two thirds on the top. Final shape is a matter of personal taste, but I like a bit of a taper toward the rear of the fly. charlie's flybox
charlies flybox
step: 29
To trim the face of the bug flat, slide the blade from the center to the edges of the face exposing the ends of the hair to form a hard surface. Use fine tipped scissors to clean up stray hairs around the hook eye and face of the bug as well as for the final shaping of the front of the fly. charlie's flybox
charlies flybox
step: 30
Place the hook back in the jaws of the vise with the mono coming down through the jaws. Be careful that the mono does not get pinched in the jaws however. Depending on the design of your vise, you may need to leave the mono on the outside of the jaws for this step. Measure the mono so it is within about a quarter inch of the hook point and flatten it where the end lines up with the hook eye. The large diameter mono will need to pass through the hook eye to secure the weed guard and flattening it will both leave enough room to thread our tippet later and make the mono tie down much easier. charlie's flybox
charlies flybox
step: 31
Here I have taken a sheet of plastic baggie and poked a small hole in its center. Slide the hook eye through the hole and start the 8/0 thread right behind the hook eye, using the plastic to hold and force the hair back to make room for the thread work. charlie's flybox
charlies flybox
step: 32
Bring the flattened section of mono up through the hook eye and bind it in place under the shank right behind the eye with several very tight turns of thread. Fold the top end of the mono back and bind it down tightly as well. Use the razor blade to trim the excess mono as close to the thread wraps as you can. Whip finish and trim the 8/0 thread. charlie's flybox
charlies flybox
step: 33
Pop the sheet of plastic forward over the hook eye and make a scissor cut from the edge to the hole in its center to remove the plastic. charlie's flybox
charlies flybox
step: 34
Remove the lead wraps from the tails strands and clean up any stray hairs as needed. charlie's flybox
charlies flybox
step: 35
charlie's flybox
charlies flybox